Installation

Follow the official Nroro instructions for each product. The warranty requires installation according to these instructions.

SPC click flooring	Installation guide (PDF) — coming soon
LVT glue-down	Installation guide (PDF) — coming soon
Slat wall panels	Installation guide (PDF) — coming soon
Flat wall panels	Installation guide (PDF) — coming soon
Trims & stair parts	Installation guide (PDF) — coming soon
Care & maintenance	Guide (PDF) — coming soon

Need a guide now? Email us (address below).

SPC click — before you start

• Acclimate boxes at least 48 hours at 60–85°F and 30–55% relative humidity.
• Subfloor flat, clean and dry; level any dip greater than 3/16" over 10 ft.
• New concrete: cure at least 90 days; use a 6-mil polyethylene moisture barrier.
• Nroro SPC planks have a 1.5 mm IXPE pad attached: no separate pad.
• Interior use only. Leave a 12 mm (1/2") expansion gap at walls and fixed objects.
• Runs longer than 10 m (32.8 ft) in either direction need a T-molding.
• Radiant heat: floor surface no warmer than 85°F (29.8°C). Not for wet areas.

Nroro warranty →